Front door window regulator removal

1. Remove the cap to expose the lock housing screw. 2. Loosen the screw 4 turns while simultaneously prying the lock housing. Don't unscrew it completely — the screw will fall inside the door. 3. Lower the window before removing the battery cables (29 cm from top edge).

Open 2 caps on the door panel. Turn the bolts only 2 turns — otherwise they'll fall out. Now the glass is released from the regulator.

1. Remove the inner seal by pulling straight up. 2. Remove all bolts holding the bracket (approximately 9 pcs). 3. Turn the front end out first, then the lock side. 4. Reassemble everything in reverse order.